FEATURES AND BENEFITS of Ceresit CT16 Quarc Primer 10L

Dispersion of synthetic resins to prime the substrates for thin layer mineral, acrylic, silicate-silicone, silicone and elastomeric plasters.

PROPERTIES

• Improves the adhesion between ETICS system layers
• Low absorbency and vapour permeability
• Easier application of plasters
• Perfect final effect of the finishing layer
• Ready to use, can be applied with roller or brush
• High opacity

DESCRIPTION

CERESIT® CT 16 facilitates the application of thin-layer plasters and renderings inside and outside the buildings. It is recommended for priming the reinforced layers within CERESIT Ceretherm ETICS and traditional plasters. CT 16 can be applied to the surfaces of chipboards, gypsum cardboards, gypsum plasters, all types of concrete and strong paint coats. Available pack size: 10 l

Ceresit CT16 Quarc Primer 10L SUBSTRATE PREPARATION

The substrates to be coated with the paint CERESIT CT 16 should be smooth, even, dry and free from any substances that decrease adhesion: grease, bitumen, dust, etc. The absorptive substrates, e.g. gypsum plasters, chipboards, non-impregnated gypsum cardboards should be primed with the agent CERESIT.

APPLICATION

The content of the packing should be stirred. Neither rusty containers nor tools should be used. Do not dilute the paint! There is recommended to apply one even layer CERESIT CT 16 using roller or brush. Drying time is approx. 3 hours. Tools and fresh stains should be washed with water.

CERESIT CT 16 PRIMER – ADHERENCE AND WEATHER CONDITIONS

The priming paint should be applied in the ambient temperature and that of the substrate from +5 °C to +25 °C and the humidity below 80 %. In case of contact with eyes, they should be rinsed with water and a general practitioner should be consulted.